Home>ISO standards list>ISO 21806-14 pdf free download

ISO 21806-14 pdf free download

ISO 21806-14-2021 pdf free download.Road vehicles一Media Oriented Systems Transport (MOST)一 Part 14: Lean application layer.
12.2 Requests, responses, and events
12.2.1 Lean network services
The network supervisor uses Init_LNS Request to initialise the lean network services. In 1n LNS Response, if Status indicates success, the initialisation of the lean network services is completed. The value error indicates invalid parameters.
The network supervisor uses Stop_LNS_Request to stop the network management processes (see Clause 13) of the lean network services. In stop LNS Response, if Status indicates success, the lean network services are stopped after completing the requested actions. The value error indicates that the lean network services terminated the management processes after expiration of tiNs TerminationS The
management processes are reset without completing all requested actions.
12.2.2 Network startup and shutdown
The network supervisor uses Network_Startup_Request to start up the MOST network. In Network_ Startup_Response, if Status indicates success, the network is active. The value error indicates failure during startup.
The network supervisor uses Network_Shutdown_Request to shut down the MOST network. In Network_ Shutdown Response, if Statu indicates success, the network is shut down. The value error indicates that the request is currently not allowed.
The lean network services use the Network_Status_Event to inform the network supervisor about a change in either network availability or a related parameter.
12.2.3 Node discovery
The network supervisor uses Node_Discovery_Start_Request to commence node discovery. In Node_ Discovery_Start_Response, if Status indicates success, the node discovery process is running.
The value error indicates missing preconditions, for example, a successful network startup.
The lean network services use Node_Discovery_Event to inform the network supervisor that a node
is discovered. The network supervisor compares the signature to the network descriptor and sends
Node_Welcome_Request. When the remote node is added to the network, the network supervisor sends
Node_Availability_Set_Reque ‘. (available).
The network supervisor uses NodeWelcorne_Request to instruct the lean network services to send
Welcome StartResul t to a remote node. In Node We lcorr – Response, if Status indicates success, the node identified by the signature is added to the network and becomes part of the network configuration. The value error indicates a transmission error during the “WeIcome sequence for the corresponding node.
The network supervisor uses Node_Availability_Set_Request to set the Availability property of a node. In Node_Availability_Set_Response, if Status indicates success, the connection management processes connections related to the corresponding node. The value error indicates invalid parameters.
The network supervisor uses Node_Discovery_Stop_Request to terminate node discovery. In Node_ Discovery_Stop_Response, if Status indicates uccess, the node discovery process is stopped. The value error indicates that the process is still running.
The network supervisor uses Check Uniqueness Request to determine why two remote nodes report identical signatures. When an already available node responds to node discovery, the network supervisor checks whether a reset occurred or two remote nodes with identical signatures exist. In Check_Uniqueness_Response, if Status indicates success, there is only one node with that signature in the network. The value error indicates the presence of two nodes with identical signatures.
12.2.4 Connection management
The network supervisor uses connectiony.anagementstart_Request to start the connection
management. In Connection_Management,start_Response, if Status indicates success, the connection
management is processing the network descriptor. The value error indicates a missing resource and the lean network services should be initialised again.
The network supervisor uses Connection_Management_Stop_Request to terminate the connection
management. In Connection Management Stop Response, if Status indicates success, the connection
management has stopped processing. The value error indicates that resources could not be released. Before starting connection management again, the lean network services should be initialised.
The network supervisor uses Path_Activation_Set_Request to set the Activation of a path. In Path Activatic Set Respense, if Status indicates success, the connection management processes connections related to the corresponding path. The value error indicates invalid parameters.
12.2.5 Diagnosis
The network supervisor uses Diagnosi’_Start_Reqiiest to start the diagnosis. Depending on the parameter, full-duplex network diagnosis or half-duplex network diagnosis is started. In Diagnosis_ Start_Response, if Status indicates success, the diagnostic process is running. The value error indicates that the selected diagnostic process cannot be started.
The lean network services use Diagnosis_Result_Event to report the diagnosis result for one link or node during diagnosis.
The lean network services use the Diagnosis_End_Event report to indicate that the diagnosis process is completed.ISO 21806-14 pdf download.

Related Standards

Categories