ISO 23223 pdf free download
ISO 23223-2021 pdf free download.Alpine ski boots with improved walking soles一Interface with alpine ski-bindings – Requirements and test methods.
This document specifies requirements, test methods and marking for alpine ski-boots with improved walking soles that are used with systems of alpine ski-bindings for improved walking soles with attachment at the boot front and boot rear, the proper release function of which depends on the dimensions and design of the interfaces.
Alpine ski boots with improved walking soles are intended to a better walkability without affecting the function of the alpine ski binding designed for improved walking soles.
This document is applicable to ski-boots of sizes 15,0 and larger (Types A (Adults) and C (Children)) in the Mondo point system (see Annex A).
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Iso 527-1, Plastics — Determination of tensile properties — Part 1: General principles
ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
ISO 554, Standard atmospheres for conditioning and/or testing — Specifications
ISO 868, Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 1183 (all parts), Plastics — Methods for determining the density and relative density of non-cellular plastics
ISO 2039-1. Plastics — Determination of hardness — Part 1: Ball indentation method
ISO 11088, Alpine ski/binding/boot (S-B-B) system — Assembly, adjustment and inspection
ISO 13993, Rental ski shop practice — Sampling and inspection of complete and incomplete alpine ski- binding-boot systems in rental applications
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://wwwiso.org/ohp
— IEC Electropedia: available at http://www.electropedia.orgJ
3.1
interface
part of the ski-boot intended to be in contact with the ski-binding
© ISO 2021 — All rights reserved I
ISO 23223:2021(E)
Looking at several dimensions (for dimensions of the 2’ degree, see Annex B) a deviation from the tolerances may be accepted, provided that the following requirements are respected:
a) The deviations shall remain exceptional.
b) The deviations shall be small.
c) No limitations of function shall arise with all marketable and critical bindings.
d) The tolerances shall be respected at the next possible chance (e.g. reconstruction of a tool). Dimensions for boots with inserts working with pin bindings are given in this document.ISO 23223 pdf download.
